RevNetTM PoE++ – LZ220 Amp
The latest in our RevNet amp series

Description

The latest in our RevNet amp series, RevNet CV and LZ amps provide ultra-easy signal management via your Dante® network and the convenience of either low-Z (4 / 8 Ω) or constant voltage (70.7 / 100 V) speaker outputs.

The simplicity of Dante® with the power you need.

Now you can power SSP6 Multiducers using audio from your Dante network. Our PoE++ amps are single cable devices designed for use in small or medium zones, with no need for a local power outlet. They use a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.

The PoE++LZ220 provides 2 channels at 20 watts each in 4 / 8 ohms (the SSP6 uses an 8 ohm load) while the CV140 provies 1 channel of 40 watts at 70V/100V. (To use the CV140 with your SSP6 Multiducer, you’ll need the RA-T1 transformer.)

Leverage the CAT5e/6 cable already in use throughout a facility to add speakers easily and quickly, with the ease of control and audio routing that your Dante network brings to the building.

 

Specifications PoE++CV140
Configurations 70/100V
Power Output 1 x 40W
Control Options Dante®
DSP processes/EQ EQ optimized for SSP6
Frequency Response 100 Hz – 20 kHz, 70.7 / 100V
Connectors Input: Dante (RJ45); Output: Euroblock
Regulatory UL 2043 listed, CE, RoHS
Weight 1.0 lbs (0.45 kg)
Dimensions 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

 

 

Specifications PoE++LZ220
Configurations 4/8/16 Ω
Power Output 2 x 20W
Control Options Dante®
DSP processes/EQ EQ optimized for SSP6
Frequency Response 20 Hz – 20 kHz, 4/8 Ω
Connectors Input: Dante (RJ45); Output: Euroblock
Regulatory UL 2043 listed, CE, RoHS
Weight 0.60 lbs (0.27 kg)
Dimensions 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

Download the RevNet PoE++ cut sheet

Download the Quick Start Guide

There are no reviews yet.

Be the first to review “RevNetTM PoE++ – LZ220 Amp
The latest in our RevNet amp series”

Your email address will not be published. Required fields are marked *